AltitudeCraft hammer holder and drill and tape measure holder set for tool belts, two black clip-on pieces on a white background
Size and specs of the AltitudeCraft tool belt holder set, showing the 2.0 by 2.2 inch steel hammer loop and the belt width it fits
Worker wearing the AltitudeCraft hammer holder and drill holder on a tool belt, with a hammer and an impact driver at the hip
Belt fit guide showing the clip-on holder on a 1.5 inch leather belt, a 2.25 inch nylon work belt and a 2.5 inch tool belt
Hammer handle dropping into the wide steel hammer loop on a belt, compared with a small ring that has to be aimed at
Close-up of the steel hammer loop and the brushed steel plate riveted to the ABS clip body
Four ways to carry with one set: hammer, impact driver, tape measure and a bundled cable on the hook-and-loop strap
Four-step install: clip each holder over the belt, drop the hammer into the loop and hang the driver by its own belt clip

AltitudeCraft Hammer Holder & Drill, Tape Measure Holder Set for Belts

The AltitudeCraft Hammer Holder & Drill, Tape Measure Holder Set is two separate clip-on holders for a...
SKU: AC428
Availability: Many In Stock
$24.99
$24.99

Free shipping & free returns on orders $25+ · arrives in 3–7 business days

Subtotal: $24.99
Free 30-Day Returns
Free returns on US orders $25+. Learn more.
AltitudeCraft hammer holder and drill and tape measure holder set for tool belts, two black clip-on pieces on a white background

AltitudeCraft Hammer Holder & Drill, Tape Measure Holder Set for Belts

$24.99

AltitudeCraft Hammer Holder & Drill, Tape Measure Holder Set for Belts

$24.99

The AltitudeCraft Hammer Holder & Drill, Tape Measure Holder Set is two separate clip-on holders for a work belt or tool belt: a hammer holder with a 2.0 x 2.2 in steel loop, and a drill & tape measure holder with a brushed steel plate. It is for carpenters, framers, electricians, roofers and DIYers who want a hammer and a drill, impact driver or tape measure at the hip instead of in a bag. Both clip over belts up to 3 in wide (most secure up to 2.5 in) and 5/16 in thick, with no unbuckling.

Will It Fit Your Belt and Tools?

  • Belt: fits belts up to 3 in wide (most secure up to 2.5 in) and 5/16 in thick. Each holder also clips over the top edge of a tool pouch.
  • Hammer: the head must be longer than 2.2 in, measured from face to claw. The handle drops through the 2.0 x 2.2 in steel loop and the head rests on top. Mini tack hammers with very short heads can slip through.
  • Drill, impact driver or tape measure: the tool must have its own belt clip. You slide that clip onto the steel plate, one tool at a time. Tools without a belt clip won't hang.
  • Not included: tools and belt.

What It Does

Hammer and drill on one belt, from one box

You get two holders: one for the hammer, one for a drill, impact driver or tape measure. Because they are separate, you can wear them side by side or on either hip.

A lip under the belt edge to help keep it in place

Each holder hooks over the top of your belt, and a lip at the bottom tucks under the belt's lower edge to help keep it in place when you bend or pull a tool.

Drop the hammer in without aiming

The steel hammer loop opens 2.0 in deep by 2.2 in wide, so you can drop a hammer in and pull it out with one hand.

Your tool's clip grips steel, not your belt

A drill, impact driver or tape measure hangs by its own belt clip on the brushed steel plate, so the tool's metal clip grips the plate instead of your belt or pants pocket.

Steel where the tool sits, ABS where it clips on

The hammer loop and the tool plate are steel, riveted to a matte ABS body. The part that clips onto your belt is ABS, not metal.

A strap for a loose cord

The hammer holder has a 19 cm (about 7.5 in) hook-and-loop strap for bundling a power cord or wire.

Specifications

Pieces 2: hammer holder, drill & tape measure holder
Hammer loop inner opening 2.0 in deep x 2.2 in wide, steel
Hammer head length Longer than 2.2 in (face to claw)
Tool plate Brushed steel; tool hangs by its own belt clip
Clip body Matte ABS, steel parts riveted on
Belt width Up to 3 in (most secure up to 2.5 in)
Belt thickness Up to 5/16 in
Cord strap 19 cm (about 7.5 in), hook-and-loop
Color Black
Package size 100 x 78 x 77 mm (about 3.9 x 3.1 x 3.0 in)
Country of origin China

In the box: 1 hammer holder, 1 drill & tape measure holder, 1 user manual. Tools and belt not included.

How to Install

  1. Clip the holder fully over the belt or pouch edge at hip height. No unbuckling needed.
  2. Check that the lip at the bottom is tucked under the lower edge of the belt.
  3. For a hammer, pass the handle through the steel loop until the head rests on top.
  4. For a drill, impact driver or tape measure, slide the tool's own belt clip fully down onto the steel plate.

Who It's For — and Who It Isn't

A good fit if you work on a belt up to 3 in wide, carry a framing, claw or rip hammer with a head longer than 2.2 in, and your drill, impact driver or tape measure has its own belt clip.

Not a good fit if your tools have no belt clip, your belt is wider than 3 in or thicker than 5/16 in, you carry a mini tack hammer with a short head, or you need a metal belt clip.

Frequently Asked Questions

What belt fits?

Belts up to 3 in wide and 5/16 in thick. They hold most securely on belts up to 2.5 in wide.

Will my hammer fit?

Yes, if the head is longer than 2.2 in from face to claw. The handle drops through the 2.0 x 2.2 in steel loop and the head rests on top.

Will my drill or tape measure fit?

Yes, if it has a built-in belt clip. Slide the clip down onto the steel plate. Tools without a belt clip won't hang.

Will it slip off my belt?

A lip on each holder tucks under your belt's lower edge to help keep it in place. For the best hold, use a belt up to 2.5 in wide.

Is the part that clips onto my belt metal?

No. The body and belt clip are ABS. The hammer loop and tool plate are steel, riveted to the body.

Can I wear them on different sides?

Yes. They are two separate holders.

Will they fit a tool pouch?

Yes. They clip over a work belt or the top edge of a tool pouch.

Warranty: 1-year warranty under normal use, extendable to 3 years when you register your product. Register for the extended warranty.

⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)