{"product_id":"hammer-holder-drill-holder-set","title":"AltitudeCraft Hammer Holder \u0026 Drill, Tape Measure Holder Set for Belts","description":"\u003cp\u003eThe AltitudeCraft Hammer Holder \u0026amp; Drill, Tape Measure Holder Set is two separate clip-on holders for a work belt or tool belt: a hammer holder with a 2.0 x 2.2 in steel loop, and a drill \u0026amp; tape measure holder with a brushed steel plate. It is for carpenters, framers, electricians, roofers and DIYers who want a hammer and a drill, impact driver or tape measure at the hip instead of in a bag. Both clip over belts up to 3 in wide (most secure up to 2.5 in) and 5\/16 in thick, with no unbuckling.\u003c\/p\u003e\n\n\u003ch2\u003eWill It Fit Your Belt and Tools?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt:\u003c\/strong\u003e fits belts up to 3 in wide (most secure up to 2.5 in) and 5\/16 in thick. Each holder also clips over the top edge of a tool pouch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHammer:\u003c\/strong\u003e the head must be longer than 2.2 in, measured from face to claw. The handle drops through the 2.0 x 2.2 in steel loop and the head rests on top. Mini tack hammers with very short heads can slip through.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill, impact driver or tape measure:\u003c\/strong\u003e the tool must have its own belt clip. You slide that clip onto the steel plate, one tool at a time. Tools without a belt clip won't hang.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included:\u003c\/strong\u003e tools and belt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat It Does\u003c\/h2\u003e\n\u003ch3\u003eHammer and drill on one belt, from one box\u003c\/h3\u003e\n\u003cp\u003eYou get two holders: one for the hammer, one for a drill, impact driver or tape measure. Because they are separate, you can wear them side by side or on either hip.\u003c\/p\u003e\n\u003ch3\u003eA lip under the belt edge to help keep it in place\u003c\/h3\u003e\n\u003cp\u003eEach holder hooks over the top of your belt, and a lip at the bottom tucks under the belt's lower edge to help keep it in place when you bend or pull a tool.\u003c\/p\u003e\n\u003ch3\u003eDrop the hammer in without aiming\u003c\/h3\u003e\n\u003cp\u003eThe steel hammer loop opens 2.0 in deep by 2.2 in wide, so you can drop a hammer in and pull it out with one hand.\u003c\/p\u003e\n\u003ch3\u003eYour tool's clip grips steel, not your belt\u003c\/h3\u003e\n\u003cp\u003eA drill, impact driver or tape measure hangs by its own belt clip on the brushed steel plate, so the tool's metal clip grips the plate instead of your belt or pants pocket.\u003c\/p\u003e\n\u003ch3\u003eSteel where the tool sits, ABS where it clips on\u003c\/h3\u003e\n\u003cp\u003eThe hammer loop and the tool plate are steel, riveted to a matte ABS body. The part that clips onto your belt is ABS, not metal.\u003c\/p\u003e\n\u003ch3\u003eA strap for a loose cord\u003c\/h3\u003e\n\u003cp\u003eThe hammer holder has a 19 cm (about 7.5 in) hook-and-loop strap for bundling a power cord or wire.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePieces\u003c\/th\u003e\n\u003ctd\u003e2: hammer holder, drill \u0026amp; tape measure holder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHammer loop inner opening\u003c\/th\u003e\n\u003ctd\u003e2.0 in deep x 2.2 in wide, steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHammer head length\u003c\/th\u003e\n\u003ctd\u003eLonger than 2.2 in (face to claw)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTool plate\u003c\/th\u003e\n\u003ctd\u003eBrushed steel; tool hangs by its own belt clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClip body\u003c\/th\u003e\n\u003ctd\u003eMatte ABS, steel parts riveted on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBelt width\u003c\/th\u003e\n\u003ctd\u003eUp to 3 in (most secure up to 2.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBelt thickness\u003c\/th\u003e\n\u003ctd\u003eUp to 5\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCord strap\u003c\/th\u003e\n\u003ctd\u003e19 cm (about 7.5 in), hook-and-loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage size\u003c\/th\u003e\n\u003ctd\u003e100 x 78 x 77 mm (about 3.9 x 3.1 x 3.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eIn the box:\u003c\/strong\u003e 1 hammer holder, 1 drill \u0026amp; tape measure holder, 1 user manual. Tools and belt not included.\u003c\/p\u003e\n\n\u003ch2\u003eHow to Install\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClip the holder fully over the belt or pouch edge at hip height. No unbuckling needed.\u003c\/li\u003e\n\u003cli\u003eCheck that the lip at the bottom is tucked under the lower edge of the belt.\u003c\/li\u003e\n\u003cli\u003eFor a hammer, pass the handle through the steel loop until the head rests on top.\u003c\/li\u003e\n\u003cli\u003eFor a drill, impact driver or tape measure, slide the tool's own belt clip fully down onto the steel plate.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eWho It's For — and Who It Isn't\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA good fit if\u003c\/strong\u003e you work on a belt up to 3 in wide, carry a framing, claw or rip hammer with a head longer than 2.2 in, and your drill, impact driver or tape measure has its own belt clip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot a good fit if\u003c\/strong\u003e your tools have no belt clip, your belt is wider than 3 in or thicker than 5\/16 in, you carry a mini tack hammer with a short head, or you need a metal belt clip.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat belt fits?\u003c\/h3\u003e\n\u003cp\u003eBelts up to 3 in wide and 5\/16 in thick. They hold most securely on belts up to 2.5 in wide.\u003c\/p\u003e\n\u003ch3\u003eWill my hammer fit?\u003c\/h3\u003e\n\u003cp\u003eYes, if the head is longer than 2.2 in from face to claw. The handle drops through the 2.0 x 2.2 in steel loop and the head rests on top.\u003c\/p\u003e\n\u003ch3\u003eWill my drill or tape measure fit?\u003c\/h3\u003e\n\u003cp\u003eYes, if it has a built-in belt clip. Slide the clip down onto the steel plate. Tools without a belt clip won't hang.\u003c\/p\u003e\n\u003ch3\u003eWill it slip off my belt?\u003c\/h3\u003e\n\u003cp\u003eA lip on each holder tucks under your belt's lower edge to help keep it in place. For the best hold, use a belt up to 2.5 in wide.\u003c\/p\u003e\n\u003ch3\u003eIs the part that clips onto my belt metal?\u003c\/h3\u003e\n\u003cp\u003eNo. The body and belt clip are ABS. The hammer loop and tool plate are steel, riveted to the body.\u003c\/p\u003e\n\u003ch3\u003eCan I wear them on different sides?\u003c\/h3\u003e\n\u003cp\u003eYes. They are two separate holders.\u003c\/p\u003e\n\u003ch3\u003eWill they fit a tool pouch?\u003c\/h3\u003e\n\u003cp\u003eYes. They clip over a work belt or the top edge of a tool pouch.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year warranty under normal use, extendable to 3 years when you register your product. \u003ca href=\"https:\/\/www.altitudecraft.com\/pages\/free-extended-warranty\"\u003eRegister for the extended warranty\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠ WARNING:\u003c\/strong\u003e Cancer and Reproductive Harm - \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"AltitudeCraft","offers":[{"title":"Default Title","offer_id":67816933720354,"sku":"AC428","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/0050\/3074\/files\/01-altitudecraft-hammer-holder-drill-tape-measure-holder-set.jpg?v=1794724971","url":"https:\/\/www.altitudecraft.com\/products\/hammer-holder-drill-holder-set","provider":"AltitudeCraft","version":"1.0","type":"link"}